VTC-100
Spin Coater VTC-100 |
|
Features |
| – Casting aluminum structure case to keep spinning stable. |
| – 3 sets of vacuum spin chuck in different size (1”, 2” and 4”) |
| – 1 piece of adhesive tape is included for customer to cut proper size for coating irregular shape substrate |
| – (e.g. Place the irregular substrate on the adhesive tape, then the vacuum chuck will suck the tape) |
| – Digital control panel with two segments programmable two different spin times and speeds |
| – Two programmable segments with separative configurations (time and speed) |
| – 500 – 8000 RPM adjustable |
| – Drainage outlet and vacuum pump connector are on the back panel. |
| – 20 mL syringe is used to contain the coating material. |
| – The syringe holder can adjust the height and rotate freely along the support rod. |
|
– One Filter is included as the standard accessory. It is used to connected between pump and coater to prevent waste water flowing into pump via pipe. |
| – Vacuum pump is not included in the standard package please click here to order oilless pump |
| Specification |
|
– Input Power: AC 110V/220V selectable. (There is a built in power socket on the right side of the VTC-100 spin coater. It is used to supply the power for the vacuum pump. The output voltage of this power supply depends on the input voltage to the spin coater main circuit. (e.g. if the spin coater is plugged in to the AC 110V power socket, then the built in power socket will supply AC 110V.) |
| – Motor Power: 150w |
| – Dimension: 13” x 10” x 8.5” |
| – Net Weight: 33 lbs |
| – Shipping dimension: 18″ x 14″ x 15″ |
| – Shipping weight: 100 lbs |
| – Warranty: One year |
| – Compliance: CE certified |
